5500W Double Stage Side Channel Blowers for Vacuum Lifting and Clamping System

Side Channel Blowers GHBH 7D5 36 2R8 Parameters:

Main Features of Goorui Regenerative Blower:
1. Adopt SKF & NSK bearing.
2. ADC12 aluminum alloy(same to BMW's wheel hubs)
3. Random installation( vertical or horizontal)
4. Insulation class: F, Protection class: IP54
5.100% oil free air delivery ( Impeller connected to the motor directly, without any oil lubricating)
6. No routine maintenance (whithout wheel gear and belt, don't need to do maintenance towards those parts)
7. Quiet operation, low noise(adopt low noise motor, meanwhile inlay muffler is available if lower noise required)
8. Variable output control(pressure or vacuum)
9. Pulsation-free compression(use quakeproof footstand)
10. Long term durability(24H running)
11. All products are strictly tested before leaving the factory
12. CE, UL, CCC, RoHS, ISO9001 certified.

Our successful client
1 Goorui High Pressure Blower is excludsively used for Qinghai-Tibet railway project.
2 Goorui blowers are widely used by government sectors, university, Training centers, Colleges, research institutes, state-owned enterprises and many private companies including Chinese Academy of Sciences, State Oceanic Administration, State Nuclear Power Technology Corporation (SNPTC) , China Academy of Machinery Science and Technology (CAM),Shanghai Jiao Tong University,Huazhong University of Science and Technology,Zhe Jiang University,Sun Yat-Sen University, Coca-Cola, Unilever. China National Petroleum Corporation(CNPC) and Inner Mongolia Yili Industrial Group Co., Ltd.
3,Successful customer testimonials: Koch-Prasad India,SACMI,MOTAN COLORTRONIC,PIOVAN,Republic sales.

Cooperative corporations:
Unilever, Chinese Academy of Sciences, Uni-President Enterprises, etc

Marketing Service
We offer side channel blowers/vacuum pumps with excellent quality and competetive price.
Meanwhile, our technicists are available to assist any of your problem. Our sales will be online to fullfill any of your requirement.

After-sale Service
12-months warranty were available for all of our products. When problem occurs, clear photos and accurate statement are needed for our specialist to analysis the cause of the problem with your engineers. If it all due to motor itself, we will find out the root cause and send you a new component to replace the bad one or change a motor for you totally free of charge. While for other reasons, we will provide professional maintenance suggestion, and send you the components with corresponding charge if you need.

INSTRUCTIONS
1. It should be placed in a relatively stable place, and the surrounding environment should be clean, dry and ventilated.
2. The direction of rotation of the impeller must be consistent with the direction of the pointed tip marked on the fan cover.
3. When working, the working pressure should not be greater than 8 kPa, so as to avoid excessive heat generation of the air pump and damage to the air pump caused by motor overcurrent.
4. It is strictly forbidden for solid, liquid and corrosive gas to enter the pump body.
5. The filters and silencers at both ends of the air inlet and outlet should be cleaned in time according to the situation to avoid clogging and affecting use.
6. The external connection of the air inlet and outlet must be connected by a hose (rubber tube, plastic spring tube).


PRECAUTIONS
1. Flat washers and spring washers must be used to tighten the screws.
2. It is best to use rubber buffer rubber to bear the weight of the vortex air pump, especially the high-power vortex air pump, which is indispensable.
3. For some occasions that require noise, a silencer can be installed to reduce the noise (generally down, about 5 dB), the silencer is installed at the end of the inlet duct or outlet duct.
4. For some occasions with high requirements for noise, you can add a layer of silencer cotton according to the conditions of the machine itself to meet the noise requirements on site. For details, please consult our customer service.
5. When using silencing cotton to silence the sound, pay attention to the distance between the vortex air pump and the box, pay attention to the ventilation and heat dissipation of the vortex air pump, and pay attention to using rubber cushioning to bear the weight of the vortex air pump. According to the picture, you need to consult customer service.
6. The air inlet and outlet of the vortex air pump For pipe connection, hose connection should be used to isolate vibration.