| Material: | Aluminum |
|---|---|
| Usage: | for Blowing and Suction |
| Flow Direction: | Centrifugal |
| Pressure: | High Pressure |
| Certification: | RoHS, ISO, CE, CCC |
| Color: | Golden/Silver |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier | Appearance | Unique appearance design with redbud pattern, national patent protection | ||||||
| Energy-Saving Motor | Equiped with IE2/IE3 energy efficency motors to save the cost! | ||||||
| Protection class | IP55 protection grade against dust and liquids, better protect the blower during operation | ||||||
| Insulation level | H level , the highest insulation grade in the blower industry , increase the motor high temperature resistance and longer the working life of blower . | ||||||
| Thermal Protector | With Thermistor the main power will turn off automatically when the blower in overload opeation, it will best protect the blower to aviod burning . | ||||||
| Bearing | Originally imported SKF bearing , high temperature resistance upto 160 ºC Special requests to Anti- high tempreture to 200 ºC by using original ORS bearing. |
||||||
New Design promotional air pump
| Model No. | GHBH 017 36 1R9 |
| Frequency | 50/60HZ |
| Power | 12.5KW |
| Voltage | 345-415/600-720Y |
| Current | 37.0/21.0YA |
| Max Airflow | 1050m3/h |
| Rated Vacuum | -280mbar |
| Rated Pressure | 270mbar |
| Sound | 74dB(A) |
| Weight | 132Kg |
| Certificate | CE/SGS/ROHS/ISO certificates |
Goorui Blower performance curve:
The above data is obtained based on laboratory testing. Actual applications will have a deviation of ±10% depending on the altitude, air density, humidity, temperature, etc.
Applications:
INSTRUCTIONS
1. It should be placed in a relatively stable place, and the surrounding environment should be clean, dry and ventilated.
2. The direction of rotation of the impeller must be consistent with the direction of the pointed tip marked on the fan cover.
3. When working, the working pressure should not be greater than 8 kPa, so as to avoid excessive heat generation of the air pump and damage to the air pump caused by motor overcurrent.
4. It is strictly forbidden for solid, liquid and corrosive gas to enter the pump body.
5. The filters and silencers at both ends of the air inlet and outlet should be cleaned in time according to the situation to avoid clogging and affecting use.
6. The external connection of the air inlet and outlet must be connected by a hose (rubber tube, plastic spring tube).
PRECAUTIONS
1. Flat washers and spring washers must be used to tighten the screws.
2. It is best to use rubber buffer rubber to bear the weight of the vortex air pump, especially the high-power vortex air pump, which is indispensable.
3. For some occasions that require noise, a silencer can be installed to reduce the noise (generally down, about 5 dB), the silencer is installed at the end of the inlet duct or outlet duct.
4. For some occasions with high requirements for noise, you can add a layer of silencer cotton according to the conditions of the machine itself to meet the noise requirements on site. For details, please consult our customer service.
5. When using silencing cotton to silence the sound, pay attention to the distance between the vortex air pump and the box, pay attention to the ventilation and heat dissipation of the vortex air pump, and pay attention to using rubber cushioning to bear the weight of the vortex air pump. According to the picture, you need to consult customer service.
6. The air inlet and outlet of the vortex air pump For pipe connection, hose connection should be used to isolate vibration.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}